Blisstool LTC64 Guia do Utilizador descarregar pdf (Página 41)

ZONES = III, AUTO ZONES = II;

- In highly mineralized terrains (GROUND COARSE = from 7 to +), is recommended: AUTO

ZONES = III.

In v5, the recommended combinations between the contamination (granularity) of

the terrain and AUTO ZONES, in a manual ground balance mode (GROUND MODE =

MAN), are:

- In unpolluted terrains, are recommended: AUTO ZONES = III, AUTO ZONES = II, AUTO

ZONES = I;

- In highly contaminated with iron and other pollutants terrains, are recommended: AUTO

ZONES = III, AUTO ZONES = II;

- In terrains dotted with stones and rocks, slag, hot rocks, ceramics, is recommended: AUTO

ZONES = III.

At v4 has only one automatic stabilizer (with a high degree of stabilization), but at v5, are

available three automatic stabilizers (with low, medium and high degree of stabilization), to

provide even greater versatility of the metal detector, as the various automatic stabilizers,

influence not only of the overall stability and the depth of detection, but also of the

base behavior of the metal detector:

- with an automatic stabilizer with a low degree of stabilization (AUTO ZONES = I),

v5 has more aggressively, primary behavior of THE BEAST, as can hear all the nuances

of the terrain. This mode is suitable for all users, but at high levels of GAIN, it is recommended

only for very experienced users, who are able to distinguish all the specific nuances of the

sound of the metal detector;

- with an automatic stabilizer with a medium degree of stabilization (AUTO ZONES =

II), v5 has more moderate, semi tamed behavior of THE BEAST, as the field work is

more comfortable. This mode is suitable for all users, but at high levels of GAIN, it is only

recommended for intermediate and advanced users;

- with an automatic stabilizer with a high degree of stabilization (AUTO ZONES =

III), v5 has totally stable, tamed behavior of THE BEAST, as the field work is much more

comfortable. This mode is suitable for all users, including beginners, intermediate and

advanced users. In this mode, even with GAIN = MAX, THE BEAST is completely stable and

unconditionally obeys of the user.

Moreover, with an automatic stabilizer with a high degree of stabilization (available

permanently in v4 and accessible in v5 with setting AUTO ZONES = III), due to the increased

overall stability of the metal detector, at deeply buried metal objects, which are of the

maximum possible depth of detection, the audio sound of the metal detector is extended,

denser and more audible versus the mode with an automatic stabilizer with a medium

degree of stabilization (available in v5 with setting AUTO ZONES = II) and mode with an

automatic stabilizer with a low degree of stabilization (available in v5 with setting AUTO ZONES

= I).

11.5. Switch DISCRIMINATOR of v4 and v5

The DISCRIMINATOR switch, for all versions, serves to set the maximum range of

discrimination of the metal detector, ie it defines the scope of potentiometer DISCR

LEVEL. The various modes are conditional numbered as: "I", "II" and "III".

- At v4, v3, v2i, v2 and v1:

- In mode DISCRIMINATOR = III, the maximum range of discrimination is limited to iron,

aluminum foil and very small, low conductive metal objects, from non-ferrous metals

and alloys;

- In mode DISCRIMINATOR = II, the maximum range of discrimination is limited to small, low

conductive metal objects, mainly from the following non-ferrous metals and their

BLISSTOOL LTC64X - User Guide (version EN201505131231) Page 41 of 62

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 61 62

Comentários a estes Manuais

Sem comentários

Blisstool LTC64 Guia do Utilizador Página 41

Comentários a estes Manuais